PERSONAL COMPUTING, ELECTRONICS AND DIY SOUND TECH => Electronics & Kabelkram (DIY) => Topic started by: Link on September 25, 2009, 04:32:51 PM

Title: Microchip PIC Programmer (etc.)
Post by: Link on September 25, 2009, 04:32:51 PM
Open Programmer
An open source USB programmer for PIC micros, I2C and MicroWire EEPROMs, some ATMEL micros, generic I2C/SPI devices and (soon) other devices ...
Quick facts

    * Completely free and Open Source (including firmware)
    * Programs PIC10-12-16-18, 24xxxx I2C EEPROMs, 93SX6 MicroWire EEPROMs, some ATMEL micros, communicates with generic I2C & SPI devices (see supported devices)
    * USB 2.0 Full Speed interface, HID class (same as keyboards, mice, etc.)
    * Self powered
    * Doesn't need drivers
    * Built from easy to find components (estimated cost ~10€)
    * Hardware generated timings for maximum speed and reliability (writes a 18F2550 in 15s, 8s under Linux)
    * Doesn't saturate your CPU and doesn't suffer when other programs are running
    * Open source control programs for Linux and Windows

Title: JDM Programmer
Post by: Link on September 25, 2009, 05:51:35 PM
JDM PIC-Programmer  |

PIC-Programmer, EEPROM adapter.
This EEPROM adapter programs 24CXX and 24LCXXB. It improves output drive of sda, and works with 24CXXB with writeprotect. The adapter allows both PIC16C84 and 24CXX to stay in socket simultanously and you does not need to remove the eeprom when programming PIC16C84. (Automatic Switch Function).


Simple JDM PIC Programmer


IC-Prog Prototype Programmer
This software package allows you to program all types of serial programmable Integrated Circuits using Windows 95/98/NT/2000/ME/XP


Free PIC Programmer Software - Windows 95/98/NT/2000/ME/XP compatible


Microchip PIC JDM Programmer User's Guide
Title: Simplified E-Eprom programmer...
Post by: Link on September 27, 2009, 05:27:50 PM
Simplified E-Eprom programmer for PIC 16F84 and 24Cxxx
24C01, 24C02, 24C04, 24C08, 24C16, 24C32, 24C64/65, 24C128, 24C256, 24C512,
24LC01, 24LC02, 24LC04, 24LC08, 24LC16, 24LC32, 24LC64/65, 24LC128, 24LC256, 24LC512
PIC microcontrollers:
PIC16C84, PIC16F84, PIC16F84A

ICprog and PonyProg compatible - hardware 'JDM programmer'.
It works under Windows XP.
Title: Programmer
Post by: Link on October 02, 2009, 01:01:16 PM
PIC Programmer
This is a fully assembled JDM PIC Programmer 2 device for programming PICs, EEPROMs, etc. It is self powered from your PC's serial port making it very easy to use. Our version of this device is built with all surface mount components and a female DB9 connector for a very compact design. We also routed pin RB4 to VSS so that programming PIC16F62x devices will work.

Jaakko Hyvätti Picprog Documentation
Title: Programmer
Post by: Link on October 10, 2009, 10:30:29 PM
serial device programmer

WinPic - A PIC Programmer for Windows